KAM-REJ-704 モールドミニフルーツ4種[極小] (個)

小口サイズ
卸価格

Product

This is a convenient silicone mold that can be used for natural air-dried clay, oven clay, UV-LED resin, etc., in addition to resin clay. You can make four types of miniature fruit motif parts (strawberry solid, strawberry half, raspberry, blueberry).

【Note on this design mold】
■ UV resin → It is cloudy when removed after curing because it is not finished with a mirror finish. The surface can be coated with UV resin or clear varnish applied twice. Whether polishing agent can be used depends on the UV resin used.
Bubbles should be pierced with a fine work stick. If bubbles enter, applying resin to the grooves of the mold before flowing resin will make it less likely for bubbles to enter. Also, by heating the mold with a dryer or embossing heater before curing, wrinkles and bubbles can be prevented.

※ Cannot be used for silicone-based materials.
※ There is a durability limit due to chemical changes for materials other than natural air-dried clay.
※ The extracted sample (parts) in the image is a work example. It is not included in the product.

■ Finished size (approx.):
Strawberry solid: Φ6 × H8.5 / Φ5.5 × H8 / Φ5 × H6.5 / Φ4 × H5 / Φ3.5 × H4.5mm
Strawberry half: 6 × 8.5 × H3 / 5.5 × 8 × H2.5 / 5 × 7 × H2.3 / 4 × 5.5 × H2 / 3.5 × 5 × H1.5mm
Raspberry: Φ5.5 × H6 / Φ5 × H5 / Φ4 × H4.2 / Φ3 × H3mm
Blueberry: Φ7 × H5.5 / Φ5.8 × H5 / Φ4.8 × H3.8 / Φ3.8 × H3 / Φ3.2 × 2mm

■ Approximate amount of clay required for one motif (approx.):
All less than 1g

■ Material: Silicone rubber
■ Manufacture: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan