ALL
◇
Events & Specials
/
UV resin and clay recommended for making accessories
/
UVレジン
/
300種以上のモールド！
◇
Misc. Crafts
/
Resin & Shrink Plastic
/
Resin Tools, Molds & Mold Putty
/
モールド
/
食べ物・食器
◇
size
/
small size

KAM-REJ-688 モールド食パン立体型 (個)

小口サイズ
卸価格

Product

This is a convenient silicone mold that can be used for natural air-dried clay, oven clay, and UV resin, starting with plastic clay. You can make a miniature three-dimensional motif of a five-size realistic corner bread.

(Note on this design mold)
■ UV resin → Since it is not finished with a mirror finish, it will be cloudy when removed after curing. You can make it look beautiful by coating the surface with two coats of UV resin or clear varnish. Whether or not you can use a polishing agent depends on the UV resin you are using. Pop bubbles with a fine craft stick, etc. If bubbles enter, it will be less likely to enter if you apply resin to the grooves of the mold and then flow the resin while warming it with a dryer or embossing heater before curing.

* Cannot be used with silicone-based materials or two-liquid mixed resin.
* There is a limit to durability due to chemical changes in materials other than natural air-dried clay.
* The extracted sample (parts) in the image is a work example. It is not included in the product.

■ Finished size (vertical × horizontal × thickness): 20 × 20 × 4 / 14 × 14 × 3 / 9 × 9 × 2 / 7 × 7 × 2 / 5 × 5 × 1.5 mm
■ Approximately required amount for one motif (about): (large) 1.9 g / 1 g or less for other small sizes
■ Material: Silicone rubber
■ Manufacture: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan