KAM-REJ-703 モールドドーナツリング K シリコン製 (個)

小口サイズ
卸価格

Product

This is a convenient silicone mold that can be used for natural air-dried clay, oven clay, and UV-LED resin, starting with resin clay. You can make three-dimensional motifs of five sizes of realistic donut-shaped pon-de.

【Notes on this design mold】
■ UV resin → It will be cloudy when removed after curing due to the lack of mirror finish. You can make it look beautiful by coating the surface with UV resin or clear varnish twice. The use of polishing agent depends on the UV resin used.
Bubbles should be pierced with a carving tool. If bubbles enter, the resin will be less likely to enter the grooves of the mold if the resin is heated with a dryer or embossing heater before hardening.

※ Silicone-based materials and two-liquid mixed resins cannot be used.
※ There is a limit to durability due to chemical changes for materials other than natural air-dried clay.
※ The extracted sample (parts) in the image is a work example. It is not included in the product.

■ Finished size (approx.): Φ22 × H8 / Φ16 × H6 / Φ13 × H5 / Φ11 × H4 / Φ9 × H3.5mm
■ Approximately required clay amount for one motif (approx.): 2.6g / 1.2g / 0.6g / 0.3g / 0.2g
■ Material: Silicone rubber
■ Manufacture: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan