This design type is convenient for use with natural air-dried clay, oven clay and UV-LED resin, starting with resin clay. You can make 5 sizes of realistic donut three-dimensional motifs (French crullers).
【Notes on this design type】
■ UV resin → Since it is not finished with a mirror finish, it will be cloudy when removed after curing. You can make the surface finish beautifully by coating it twice with UV resin or clear varnish. Whether the use of polishing agent is possible depends on the UV resin used.
Bubbles can be crushed with a carving tool, etc. If bubbles enter, it will be less likely to enter if the resin is poured after applying the resin to the groove of the mold while the resin is in the mold. Also, by heating the mold with a dryer or embossing heater before curing, wrinkles and bubbles will be less likely to occur.
※ Silicone-based materials and two-liquid mixed resins cannot be used.
※ There is a service life limit due to chemical changes for materials other than natural air-dried clay.
※ The extracted sample (parts) in the image is a work example. It is not included in the product.
■ Finished size (approx.): Φ22 × H12 / Φ16 × H9 / Φ13 × H8 / Φ11 × H6 / Φ9 × H5 mm
■ Approximately required clay amount for one motif (approx.): 3.5 g / 1.8 g / 0.7 g / 0.5 g / 0.3 g
■ Material: Silicone rubber
■ Manufacture: Art Gallery Floree
■ Distributor: Kamijima Shouten Co., Ltd.
■ Made in Japan
※ Since it is a mail order, please allow us some time for delivery.
- Product name
-
【お取り寄せ・返品不可】KAM-REJ-700 モールド フレンチクルーラー H シリコン製 (個)
- Product code
-
KAM-REJ-700
- Original price
-
1,450
JPY
- Wholesale Price
-
Our Prices are Only Visible to Members